Home › FAQ
Appliance repair FAQ
What a visit costs, what the warranty covers, how fast we can get to you — and the faults we're asked about most, answered the way we'd answer them at your door.
Our service call is $79, and it's waived completely if you approve the repair — you only pay for the repair itself. If you decide not to fix the appliance after the diagnosis, the $79 covers the visit and the technician's time.
Most repairs come to about $200–$400 total, parts and labor included. We quote a flat price before we start, so you approve the exact number first. We never charge by the hour and we don't add anything after the fact.
No. The price is the same any day of the week, weekends included.
In most cases the same day. We work 7 days a week, 8AM to 8PM, and we give you a 2-hour arrival window instead of making you wait around all day.
Yes — an adult needs to be home to let the technician in, approve the quote and sign off on the finished work. A standard repair takes about an hour.
By the secure payment link we text or email you, over the phone, or by bank transfer. Card payments include a 3% processing fee.
Yes. We handle rentals and vacation properties regularly, coordinate access with the tenant, and send photo documentation with the invoice so you can approve the work remotely.
90 days on labor and up to 1 year on parts, depending on the manufacturer. If the same problem comes back within the warranty period, the return visit is free — no second service call.
Plastic parts, shelf supports and basket slides aren't covered, since those wear and break mechanically rather than fail electrically.
Our van and local stock carry the parts that fail most often, so most repairs are finished on the first visit. If your model needs an ordered part, we tell you the price and the ETA, order it, and come back to install it — that second visit is included, not another service call.
All major brands — Whirlpool, GE, Samsung, LG, Maytag, Frigidaire, Kenmore, Bosch, KitchenAid, Electrolux, Amana, Hotpoint — plus high-end built-ins like Sub-Zero, Wolf, Viking and Thermador. More than 40 brands in all.
Our rule of thumb: if the repair costs less than half the price of a comparable new unit and the appliance is under ten years old, repairing it is almost always the better deal. After the diagnosis we tell you honestly when it isn't worth fixing — we'd rather lose a job than sell you a repair that won't pay off.
The coastal stretch from Hudson to St. Petersburg: Trinity, Odessa, Lutz, Port Richey, New Port Richey, Holiday, Tarpon Springs, Palm Harbor, Oldsmar, Dunedin, Safety Harbor, Clearwater, Largo, Seminole, Pinellas Park and St. Petersburg. If your town isn't listed, call and ask.
Nine times out of ten it's airflow between the two compartments: a frosted-over evaporator coil, a failed evaporator fan, or a defrost system that stopped cycling. Less often it's a damper or the control board. If the freezer is still cold the compressor is usually fine, which normally makes this an affordable repair rather than a replacement.
Pull it out and look at the condenser coils underneath or behind it. In Florida, dust and pet hair choke them fast, and a clogged coil alone can stop a fridge from cooling. Also check that the vents inside aren't blocked by food and that the unit has a few inches of clearance. If the coils are clean and it still won't cool, it's an internal fault and needs a technician.
Water is reaching the fridge, so the inlet valve and line are usually fine. The usual suspects are the ice maker module itself, a fill tube frozen shut, a stuck shut-off arm or optic sensor, or a freezer running too warm — it needs to be at or below 10°F to cycle properly.
Unplug the machine first, then check the drain hose for a kink and the pump filter for a sock or a coin — that's the most common cause. If the filter is clear and the pump only hums or stays silent, the pump or the control board has failed. Don't run another cycle with water still in the drum; it can push water onto the floor.
On an electric dryer it's usually a blown thermal fuse, a failed heating element or a thermostat — and the fuse almost always blows because the vent is clogged with lint. On a gas dryer it's typically the igniter or the gas valve coils. Replacing the part without clearing the vent just blows the next fuse, so the vent gets checked as part of the repair.
A thin film of water in the sump is normal. An inch or more standing after a cycle is not: that's a clogged filter or drain hose, a blocked air gap or garbage disposal port, or a failed drain pump. Pouring drain cleaner in is a bad idea — it damages the seals and doesn't reach the actual clog.
They're separate circuits. On an electric range it's usually the bake element; on a gas model the oven igniter; otherwise the oven sensor, thermostat or relay board. The cooktop working tells us the main power supply is fine, which narrows the diagnosis down quickly.
Call or text us — 7 days a week, 8AM–8PM. The $79 service call is waived when you go ahead with the repair.